| Author |
Message |
|
vlaporte
|
Post subject: motor start abruptly  Posted: Wed Jan 20, 2010 7:47 am |
|
Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
|
|
I have a HoneyBeeFP and built a Guru Neon frame, added 12mm belt tail kit, added Telebee gyro, added [GE38H]3900kV Brushless motor and [GE118]18A Brushless ESC.
I also use Xtreme fiber blades that are shortened by one inch on each end. It flies great. It was lots of fun gradually adding modifacations.
My only concern is the abrupt start of this brushless motor. I went through the programming and set to soft start but still abrupt. Is this normal for such a small motor?
Thanks,
Vince
|
|
  |
|
 |
|
louie_dui
|
Post subject: Re: motor start abruptly Posted: Fri Jan 22, 2010 2:33 pm |
|
Joined: Fri Oct 23, 2009 3:59 pm
Posts: 6
|
Hi, what is the programming card you use to program the Guru-Z esc?  I do not used to program the esc with the throttle stick, still not yet find out which programming card to use to program the Guru-Z esc... 
|
|
| |
|
|
|
vlaporte
|
Post subject: Re: motor start abruptly Posted: Sat Jan 23, 2010 12:21 am |
|
Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
|
|
Louie,
I do not have a programing card that works - I used the transmitter throttle stick.
Vince
|
|
| |
|
|
|
mystic
|
Post subject: Re: motor start abruptly Posted: Tue Jan 26, 2010 12:12 pm |
|
Joined: Tue Jun 02, 2009 6:08 pm
Posts: 6
|
Hi, You can set the motor to be "very soft start" 
_________________
-Fly me to the moon-
|
|
| |
|
|
|
vlaporte
|
Post subject: Re: motor start abruptly Posted: Wed Jan 27, 2010 6:28 am |
|
Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
|
|
I am setting the motor to "very soft start" but still not very soft.
Vince
|
|
| |
|
|
|
mystic
|
Post subject: Re: motor start abruptly Posted: Sat Jan 30, 2010 12:17 pm |
|
Joined: Tue Jun 02, 2009 6:08 pm
Posts: 6
|
vlaporte wrote: I am setting the motor to "very soft start" but still not very soft.
Vince Hi, How about the timing of ESC and the curve of TX? | set mine with Med. timing and the curve not too sharp at first 30% of throttle.
_________________
-Fly me to the moon-
|
|
| |
|
|
|
vlaporte
|
Post subject: Re: motor start abruptly Posted: Sun Jan 31, 2010 1:06 am |
|
Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
|
|
Program card.
Where can I get a program card for the little GURU (GE series) motor?
I tried my Turnigy card but it does not work.
Thanks,
Vince
|
|
| |
|
|
|
kenlau
|
Post subject: Re: motor start abruptly Posted: Fri Feb 05, 2010 6:26 pm |
|
Joined: Fri Feb 05, 2010 6:10 pm
Posts: 2
|
|
I dont think there is a program card at the moment.
Try the timing option.
|
|
| |
|
|
|
Solitaire
|
Post subject: Re: motor start abruptly Posted: Sun Feb 21, 2010 3:29 pm |
|
Joined: Tue Oct 20, 2009 3:28 pm
Posts: 1
|
vlaporte wrote: Program card.
Where can I get a program card for the little GURU (GE series) motor?
I tried my Turnigy card but it does not work.
Thanks,
Vince Try a Turnigy Plush ESC and use your programmer with that. The Plush has a "very soft start" option.
|
|
| |
|
|
|
