Register    Login    Forum    Search    FAQ

Board index » Guru-Z » User Experiences




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 
Author Message
 Post subject: motor start abruptly
 Post Posted: Wed Jan 20, 2010 7:47 am 
Offline

Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
I have a HoneyBeeFP and built a Guru Neon frame, added 12mm belt tail kit, added Telebee gyro, added [GE38H]3900kV Brushless motor and [GE118]18A Brushless ESC.
I also use Xtreme fiber blades that are shortened by one inch on each end. It flies great. It was lots of fun gradually adding modifacations.
My only concern is the abrupt start of this brushless motor. I went through the programming and set to soft start but still abrupt. Is this normal for such a small motor?
Thanks,
Vince


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Fri Jan 22, 2010 2:33 pm 
Offline

Joined: Fri Oct 23, 2009 3:59 pm
Posts: 6
Hi, what is the programming card you use to program the Guru-Z esc? :?:
I do not used to program the esc with the throttle stick, still not yet find out which programming card to use to program the Guru-Z esc... :(


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Sat Jan 23, 2010 12:21 am 
Offline

Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
Louie,
I do not have a programing card that works - I used the transmitter throttle stick.
Vince


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Tue Jan 26, 2010 12:12 pm 
Offline
User avatar

Joined: Tue Jun 02, 2009 6:08 pm
Posts: 6
Hi,

You can set the motor to be "very soft start" :D

_________________
-Fly me to the moon-


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Wed Jan 27, 2010 6:28 am 
Offline

Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
I am setting the motor to "very soft start" but still not very soft.
Vince


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Sat Jan 30, 2010 12:17 pm 
Offline
User avatar

Joined: Tue Jun 02, 2009 6:08 pm
Posts: 6
vlaporte wrote:
I am setting the motor to "very soft start" but still not very soft.
Vince

Hi,
How about the timing of ESC and the curve of TX? :?:
| set mine with Med. timing and the curve not too sharp at first 30% of throttle.

_________________
-Fly me to the moon-


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Sun Jan 31, 2010 1:06 am 
Offline

Joined: Mon Dec 28, 2009 3:39 am
Posts: 10
Program card.
Where can I get a program card for the little GURU (GE series) motor?
I tried my Turnigy card but it does not work.
Thanks,
Vince


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Fri Feb 05, 2010 6:26 pm 
Offline

Joined: Fri Feb 05, 2010 6:10 pm
Posts: 2
I dont think there is a program card at the moment.
Try the timing option.


Top 
 Profile  
 
 Post subject: Re: motor start abruptly
 Post Posted: Sun Feb 21, 2010 3:29 pm 
Offline

Joined: Tue Oct 20, 2009 3:28 pm
Posts: 1
vlaporte wrote:
Program card.
Where can I get a program card for the little GURU (GE series) motor?
I tried my Turnigy card but it does not work.
Thanks,
Vince


Try a Turnigy Plush ESC and use your programmer with that. The Plush has a "very soft start" option.


Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 9 posts ] 

Board index » Guru-Z » User Experiences


Who is online

Users browsing this forum: No registered users and 8 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron